Control points

“Control points” keeps what you watch at each step of the process (the temperature of a cold room, the chlorine in the wash water, the metal detector…), between which values it must be, how often it is read and who answers for it. Each reading says at once whether it is within the limit; if not, it asks what was done and opens a non-conformity.

1. Create a control point

Press “New control point”. Enter the name, the process step, what is controlled, the unit (for example °C), the minimum and the maximum limit (one of them is enough), how often it is read and who is responsible. In “What to do if it goes out of limits” you can leave the instruction that whoever records an out-of-limits reading will see. If something is missing, the screen marks the field and says what to write; nothing is lost. We tell the responsible person when assigned.

2. Record a reading

Open the point and type the value in “Record a reading”. While you type, the screen says whether it is within the limit; a value equal to the limit counts as within. If you measured it in another equivalent unit (for example °F instead of °C), type it in “Unit”: it is converted automatically. Press “Record reading”. If the value is not a number or the unit cannot be converted, it tells you and saves nothing.

3. When a reading goes out of limits

“What you did to correct it” appears, which is required, with the point's instruction. By default a non-conformity is opened for the responsible person, linked to the reading; you can untick it. If you typed a lot that is in Lots and traceability, it is put on hold (you can untick it) and nobody can ship it until you decide what to do with it. The reading is saved with what was done.

4. Late readings, history and chart

When the frequency time passes with no reading, the point shows as “Reading late”, in the panel's “What to do” and in the responsible person's notifications. The “Readings” tab has every reading with its result and who recorded it; “Chart” shows the trend with the limits. If you make a mistake, delete the reading from the history. A paused point does not ask for readings or warn.